Point Cutting Roundover Bit
HW/Z2/RH
Two flutes, 1/4 & 1/2" shank
Used for decorative grooving. Also recommended for edge forming with a router guide.
| A inch |
B inch |
C inch |
D inch |
E inch |
R inch |
Part No. |
|---|---|---|---|---|---|---|
| 1/8 | 7/32 | 1/4 | 1-1/4 | 3/64 | 1/16 | 225011 |
| 1/4 | 3/8 | 1/4 | 1-1/4 | 3/32 | 1/8 | 225021 |
| 3/8 | 3/8 | 1/4 | 1-1/4 | 1/8 | 3/16 | 225031 |
| 1/2 | 3/8 | 1/4 | 1-1/4 | 11/64 | 1/4 | 225041 |
| 3/4 | 5/8 | 1/4 | 1-1/4 | 1/4 | 3/8 | 225051 |
| 3/4 | 5/8 | 1/2 | 1-1/2 | 1/4 | 3/8 | 225451 |
| 1 | 3/4 | 1/2 | 1-1/2 | 11/32 | 1/2 | 225461 |
| A mm |
B mm |
E mm |
R mm |
C=Ø6x32mm Part No. |
C=Ø12x40mm Part No. |
|---|---|---|---|---|---|
| 3.175 | 5.8 | 1.2 | 1.5875 | 225611 | |
| 6.35 | 9.53 | 2.38 | 3.175 | 225621 | |
| 9.53 | 9.53 | 3.175 | 4.765 | 225631 | |
| 12.7 | 9.53 | 4.36 | 6.35 | 225641 | |
| 19.05 | 15.88 | 6.35 | 9.525 | 225651 | 225251 |
| 25.4 | 19.05 | 8.73 | 12.7 | 225261 |