Trimming Cutter TC With Ball Bearing
HW/Z3/RH
For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily.
| A inch |
B inch |
C inch |
D inch |
Bearing | Part No. |
|---|---|---|---|---|---|
| 1/2 | 1/2 | 1/4 | 1-1/4 | 1/2 | 151111 |
| 1/2 | 1 | 1/4 | 1-1/4 | 1/2 | 151121 |
| 1/2 | 1-1/4 | 1/4 | 1-1/4 | 1/2 | 151141 |
| 5/8 | 1/2 | 1/4 | 1-1/4 | 5/8 | 151171 |
| 5/8 | 1 | 1/4 | 1-1/4 | 5/8 | 151173 |
| 3/4 | 1/2 | 1/4 | 1-1/4 | 3/4 | 151181 |
| 3/4 | 1 | 1/4 | 1-1/4 | 3/4 | 151183 |
| 1/2 | 1/2 | 1/2 | 1-1/2 | 1/2 | 151511 |
| 1/2 | 1 | 1/2 | 1-1/2 | 1/2 | 151521 |
| 1/2 | 1-3/16 | 1/2 | 1-1/2 | 1/2 | 151531 |
| 1/2 | 1-1/4 | 1/2 | 1-1/2 | 1/2 | 151541 |
| 1/2 | 1-1/2 | 1/2 | 1-1/2 | 1/2 | 151551 |
| 5/8 | 1/2 | 1/2 | 1-1/2 | 5/8 | 151571 |
| 5/8 | 1 | 1/2 | 1-1/2 | 5/8 | 151573 |
| 5/8 | 1-1/4 | 1/2 | 1-1/2 | 5/8 | 151575 |
| 5/8 | 1-1/2 | 1/2 | 1-1/2 | 5/8 | 151577 |
| 5/8 | 2 | 1/2 | 1-1/2 | 5/8 | 151579 |
| 3/4 | 1/2 | 1/2 | 1-1/2 | 3/4 | 151581 |
| 3/4 | 1 | 1/2 | 1-1/2 | 3/4 | 151583 |
| 3/4 | 1-1/4 | 1/2 | 1-1/2 | 3/4 | 151585 |
| 3/4 | 1-1/2 | 1/2 | 1-1/2 | 3/4 | 151587 |
| 3/4 | 2 | 1/2 | 1-1/2 | 3/4 | 151589 |
| A mm |
B mm |
C=Ø6x32mm Part No. |
C=Ø8x32mm Part No. |
C=Ø12x40mm Part No. |
Bearing No. |
|---|---|---|---|---|---|
| 12.7 | 12.7 | 150611 | 150811 | 150211 | 706051 |
| 12.7 | 25.4 | 150621 | 150821 | 150821 | 706051 |
| 12.7 | 38.1 | 150851 | 150251 | 706051 | |
| 12.7 | 50.8 | 150861 | 150261 | 706051 |