Bottom Cleaning Bits
HW/Z2/RH
Two flutes, 1/4" & 1/2" shank
This two flute carbide-tipped bit will do the job,
leaving a smooth, flat bottom cut.It's also
effective at leveling the bottom of a dado cut
when using a wobble blade.
| A inch |
B inch |
C inch |
D inch |
Part No. |
|---|---|---|---|---|
| 3/4 | 15/32 | 1/4 | 1-1/4 | 214011 |
| 7/8 | 15/32 | 1/4 | 1-1/4 | 214021 |
| 1 | 15/32 | 1/4 | 1-1/4 | 214031 |
| 3/4 | 15/32 | 1/2 | 1-1/2 | 214411 |
| 7/8 | 15/32 | 1/2 | 1-1/2 | 214421 |
| 1 | 15/32 | 1/2 | 1-1/2 | 214431 |
| 1-1/4 | 15/32 | 1/2 | 1-1/2 | 214441 |
| 1-1/2 | 15/32 | 1/2 | 1-1/2 | 214451 |
| A mm |
B mm |
C=Ø6x32mm Part No. |
C=Ø8x32mm Part No. |
C=Ø12x40mm Part No. |
|---|---|---|---|---|
| 19.05 | 11.9 | 214611 | 214811 | 214211 |
| 22.22 | 11.9 | 214621 | 214821 | 214221 |
| 25.4 | 11.9 | 214631 | 214831 | 214231 |
| 31.8 | 11.9 | 214241 | ||
| 38.1 | 11.9 | 214251 |