Rabbeting Bits
Two flutes, 1/4" & 1/2" shank, 1/2" bearing
These Rabbeting Bits will produce super smooth cuts on
both surfaces of the rabbet. Can be used in joining boards
or for letting in back panels.
Bearing pilots can be removed from bits and used with
edge guides for wider rabbets.
| A inch |
B inch |
C inch |
D inch |
Bearing | Part No. |
|---|---|---|---|---|---|
| 1-3/8 | 1/2 | 1/4 | 1-1/4 | 3/8. 1/2. 5/8. 3/4 | 307161 |
| 1-3/8 | 1/2 | 1/4 | 1-1/4 | 3/8. 1/2. 5/8. 3/4. 7/8 | 307165 |
| 1-3/8 | 1/2 | 1/4 | 1-1/4 | 3/8. 1/2. 5/8. 3/4. 7/8. 1 | 307171 |
| 1-3/8 | 1/2 | 1/4 | 1-1/4 | 3/8. 1/2. 5/8. 3/4. 7/8. 1. 1-1/8. 1-3/8 | 307175 |
| 1-3/8 | 1/2 | 1/2 | 1-1/2 | 3/8. 1/2. 5/8. 3/4 | 307561 |
| 1-3/8 | 1/2 | 1/2 | 1-1/2 | 3/8. 1/2. 5/8. 3/4. 7/8 | 307565 |
| 1-3/8 | 1/2 | 1/2 | 1-1/2 | 3/8. 1/2. 5/8. 3/4. 7/8. 1 | 307571 |
| 1-3/8 | 1/2 | 1/2 | 1-1/2 | 3/8. 1/2. 5/8. 3/4. 7/8. 1. 1-1/8. 1-3/8 | 307575 |