Edge V-Grooving Bit
Two flutes, 1/2" shank
Here's a simple and economical way for you to make your own edge.
Simple set the height of the female groover (#336) in your router table
so that the point is centered on the wood panel and make the cut. Now
using the male groover (#337) in your router table, set the height of the
bit so that the center point of the bit matches the center point of the
wood panel and then cut out the wood stock material. Glue the two
pieces together and flush trim the edges if necessary.
| A inch |
B inch |
C inch |
D inch |
E inch |
Part No. |
|---|---|---|---|---|---|
| 1-1/8 | 1/2 | 1/2 | 1-1/2 | 90° | 336411 |
| 1-3/8 | 3/4 | 1/2 | 1-1/2 | 90° | 336421 |
| 1-1/8 | 1/2 | 1/2 | 1-1/2 | 90° | 337411 |
| 1-3/8 | 3/4 | 1/2 | 1-1/2 | 90° | 337421 |