V-Groove And Engraving Cutter TC / Two Flutes
HW/Z2/RH
V-groove and engraving cutter used on high speed routers for bevelling, chamfering and for producing mortar grooves.
| A mm |
B mm |
α | C=Ø6x32mm Part No. |
C=Ø8x32mm Part No. |
C=Ø12x40mm Part No. |
|---|---|---|---|---|---|
| 6 | 6 | 90° | 200608 | ||
| 6.35 | 9.5 | 90° | 200609 | 200809 | 200209 |
| 6.35 | 7.94 | 90° | 200610 | 200810 | |
| 9.5 | 9.5 | 90° | 200611 | 200811 | 200211 |
| 9.5 | 12.7 | 90° | 200612 | 200812 | 200212 |
| 12.7 | 9.53 | 90° | 200618 | 200818 | 200218 |
| 12.7 | 11.11 | 90° | 200621 | 200821 | 200221 |
| 12.7 | 12.7 | 90° | 200622 | 200822 | 200222 |
| 14 | 12.7 | 90° | 200628 | 200828 | 200228 |
| 15.9 | 12.7 | 90° | 200631 | 200831 | 200231 |
| 19.05 | 12.7 | 90° | 200638 | 200838 | 200238 |
| 19.05 | 15.9 | 90° | 200641 | 200841 | 200241 |
| 22.2 | 15.9 | 90° | 200651 | 200851 | 200251 |
| 25.4 | 19 | 90° | 200661 | 200861 | 200261 |
| 31.7 | 16 | 90° | 200865 | 200265 | |
| 32 | 22 | 90° | 200871 | 200271 | |
| 38.1 | 25.4 | 90° | 200281 |