Classic Plunge Cutter Bits
HW/Z2/RH
Classic plunge cutter with two flutes. Profile with radiussed bottom cut. Suitable for plunge.
| A inch |
B inch |
C inch |
D inch |
R inch |
Part No. |
|---|---|---|---|---|---|
| 1/2 | 3/8 | 1/4 | 1-1/4 | 3/32 | 211011 |
| 3/4 | 1/2 | 1/4 | 1-1/4 | 5/32 | 211021 |
| 1/2 | 3/8 | 1/2 | 1-1/2 | 3/32 | 211411 |
| 3/4 | 1/2 | 1/2 | 1-1/2 | 5/32 | 211421 |
| 1 | 5/8 | 1/2 | 1-1/2 | 7/32 | 211431 |
| 1-1/2 | 3/4 | 1/2 | 1-1/2 | 11/32 | 211441 |
| R mm |
A mm |
B mm |
C=Ø6x32mm Part No. |
C=Ø8x32mm Part No. |
C=Ø12x40mm Part No. |
|---|---|---|---|---|---|
| 2.38 | 12.7 | 9.53 | 211611 | 211811 | 211211 |
| 3.96 | 19.05 | 12.7 | 211621 | 211821 | 211221 |
| 5.56 | 25.4 | 15.9 | 211231 |