Chamfer Cutter 45° With Ball Bearing
HW/Z2/RH
Two flute, carbide tipped with exchangeable ball bearing. Ideal for beveling and decorative edges. Also used for producing a 45ﾟedge for mitres.
| A inch |
B inch |
C inch |
D inch |
Part No. |
|---|---|---|---|---|
| 1 | 3/8 | 1/4 | 1-1/4 | 306011 |
| 1-3/16 | 1/2 | 1/4 | 1-1/4 | 306021 |
| 1-7/16 | 5/8 | 1/4 | 1-1/4 | 306031 |
| 1 | 3/8 | 1/2 | 1-1/2 | 306411 |
| 1-3/16 | 1/2 | 1/2 | 1-1/2 | 306421 |
| 1-7/16 | 5/8 | 1/2 | 1-1/2 | 306431 |
| 1-5/8 | 3/4 | 1/2 | 1-1/2 | 306441 |
| 1-3/4 | 7/8 | 1/2 | 1-1/2 | 306451 |
| 1-7/8 | 1 | 1/2 | 1-1/2 | 306461 |
| 2-1/4 | 1-1/4 | 1/2 | 1-1/2 | 306471 |
| α | A mm |
B mm |
C=Ø6x32mm Part No. |
C=Ø8x32mm Part No. |
C=Ø12x40mm Part No. |
Bearing No. |
|---|---|---|---|---|---|---|
| 45° | 25.4 | 6.35 | 306611 | 306811 | 306211 | 706051 |
| 45° | 28.6 | 9.53 | 306615 | 306815 | 306215 | 706031 |
| 45° | 30.16 | 8.73 | 306621 | 306821 | 306221 | 706051 |
| 45° | 36.5 | 11.9 | 306631 | 306831 | 360231 | 706051 |
| 45° | 44.5 | 15.88 | 306251 | 706051 | ||
| 45° | 47.6 | 17.46 | 306261 | 706051 | ||
| 45° | 50.8 | 19.05 | *306263 | *706051 | ||
| 45° | 57.15 | 22.2 | *306271 | *706051 |