Ogee Filet Cutter With Ball Bearing
HW/Z2/RH
Two flute ogee filet cutter with exchangeable bearing. A variation on the ogee profile, more clearly defining the top edge with a step.
| A inch |
B inch |
C inch |
D inch |
R inch |
Part No. |
|---|---|---|---|---|---|
| 1-3/8 | 9/16 | 1/4 | 1-1/4 | 3/16 | 310011 |
| 1-5/8 | 11/16 | 1/4 | 1-1/4 | 1/4 | 310021 |
| 1-3/8 | 9/16 | 1/2 | 1-1/2 | 3/16 | 310411 |
| 1-5/8 | 11/16 | 1/2 | 1-1/2 | 1/4 | 310421 |
| R1 mm |
R2 mm |
A mm |
B mm |
C=Ø6x32mm Part No. |
C=Ø8x32mm Part No. |
C=Ø12x40mm Part No. |
Bearing No. |
|---|---|---|---|---|---|---|---|
| 4.76 | 4.76 | 34.92 | 14.3 | 310611 | 310811 | 310211 | 706051 |
| 6.35 | 6.35 | 41.28 | 17.5 | 301621 | 310821 | 310221 | 706051 |